Source Technologies ST9530 User Manual

Page 60

Secure MICR Printer User’s Guide

September 2005

Appendix E: MICR Mode Command Summary

Description

Command

Structure Function

Password

&%STFPASSWORD$

Must be sent to enable

&%STHPASSWORD$

MICR Mode

MICR Definition

&%SMCPxxxx$

MICR Line Count command

Set New Password

&%STExxxxxxxx$

Sets new password, must be
preceded by current password

Activate/Set Front Panel &%STSxxxxxxxxx$

Turns on and sets Front Panel

Combination

Lock, must be 8 integers

Print MICR E13B Font

&%SMDddd...ddd$

Prints E13-B MICR Font at the current
print position, see Appendix A

Print MICR CMC7

&%SM7ddd...ddd$

Prints CMC-7 MICR font at the current

print position, see Appendix B

Print Secure Numeric Font &%SMFddd...ddd~

Prints the Secure Numeric Font at the
current print position Note: The tilde is
the command terminator, see
Appendix C

Print ICR Secure Numeric Font &%SMIxxxxxx~

Prints the ICR Secure Numeric Font at
the current print position, see
Appendix D

Print in MicroPrint

&%SMMxxxxxx$

Prints data in MicroPrint font.

Load Flash Resource &%STLxxxxxyyyyyyzddd...dd$ Loads a Flash Resource file into

password protected Flash Memory

Format Flash Memory

&%SFF$

Formats Flash Memory Caution: All
flash contents will be lost

Flash Resource Unlock &%STPxxxxx$

Makes Flash Resource Command
available to be called, must be 5
integers

Tray Lock Command

&%STTL#$

Locks Tray 1, 2 or 3 for MICR printing

Unlock Tray Command

&%STTU#$

Locks Tray 1, 2, or 3