Source Technologies ST9530 User Manual

Page 44

Secure MICR Printer User’s Guide

September 2005

For example, the command &%SPURGES$ sorts the records by the MICR line while the
command &%SPURGESO$ sorts the records by the MICR line and prints an overlay with the
data.

Options can be forced on with these commands but they cannot be forced off. In other
words, if the front panel overlay setting is on, it cannot be forced off by a datastream
command. If the front panel overlay setting is off, however, a datastream command can
activate this feature. This command can only be accessed with a valid password command.

Print Audit Report

&%SPRINTxx$

&%SPRINT

Lead in string

x option(s)
$ Command

terminator

Prints the Audit Report

The optional field can be any combination of the following letters:

Total Field 4

O Overlay
S

Sort by MICR line

Unsuccessful report only

Communicate - send report to host instead of printing

The report sent back to the host begins with SOH (0x01) and ends with EOT (04). Since the
reports can be quite long, they will likely be broken into separate buffers which may be
interspersed with non-audit buffers such as PJL JOB status. Each buffer will begin with an
STX character (0x02) and end with ETX (0x03).

Each record will be terminated with carriage return-line feed (0x0D 0A).

Start Audit Feedback Command

&%SAF$

The printer will report to the host that sent this command every time an audit job

successfully

prints.

Each report will be a 151 byte string:

byte

STX

(0x02)

bytes 2-15 field 1 of the audit record (from SQ1)

16-55

field 2 (from SMD)

56-95

field 3 (from SQ3)

96-111 SQ4
112-119

SQ5

120-138

SQ6

139-150

SQ7