SMSC USB2507 - Manual (Page 20)

Integrated USB 2.0 Compatible 7-Port Hub
Datasheet
Revision 2.3 (08-27-07) 20 SMSC USB2507
DATASHEET
5.2.3.1 EEPROM Offset 1:0(h) - Vendor ID
5.2.3.2 EEPROM Offset 3:2(h) - Product ID
5.2.3.3 EEPROM Offset 5:4(h) - Device ID
5.2.3.4 EEPROM Offset 6(h) - CONFIG_BYTE_1
Hub Controller
Max Current
Bus-Powered E 1 64 64 Max Current (expressed in 2mA units).
Power-On
Time F 1 32 32 Time until power is stable.
BIT
NUMBER BIT NAME DESCRIPTION
15:8 VID_MSB Most Significant Byte of the Vendor ID.
7:0 VID_LSB Least Significant Byte of the Vendor ID.
BIT
NUMBER BIT NAME DESCRIPTION
15:8 PID_MSB Most Significant Byte of the Product ID.
7:0 PID_LSB Least Significant Byte of the Product ID.
BIT
NUMBER BIT NAME DESCRIPTION
15:8 DID_MSB Most Significant Byte of the Device ID.
7:0 DID_LSB Least Significant Byte of the Device ID.
BIT
NUMBER BIT NAME DESCRIPTION
7 SELF_BUS_PWR Self or Bus Power: Selects between Self- and Bus-Powered operation.
0 = Bus-Powered operation. (BUS Default)
1 = Self-Powered operation. (SELF Default)
Note: If Dynamic Power Switching is enabled, this bit is ignored and the
SELF_PWR pin is used to determine if the hub is operating from self or bus
power.
6 PORT_IND Port Indicator Support: Indicates implementation of LED indicators
0 = No LED indicators.
1 = LED indicators.
Table 5.1 User-Defined Descriptor Data (continued)
FIELD
BYTE
MSB:
LSB
SIZE
(BYTES)
DEFAULT
CFG
SELF
(HEX)
DEFAULT
CFG
BUS
(HEX) DESCRIPTION