Samsung DVD-R145 - Manual (Page 52)

52 - English
R
ecording
Recording from External
Equipment
Check that the disc has enough available space for the
recording. Adjust the record mode.
1 Press the OPEN/CLOSE button, and place a
recordable disc on the disc tray.
2 Press the OPEN/CLOSE button to close the disc tray.
Wait until “LOAD” disappears from the front panel
display.
If an unused DVD-RW disc is inserted, the message
“Uninitialized Disc Do you want to initialize this disc?” will
appear (See page 49)
3 Press the INPUT SEL. button to select the input
source according to the connection you made.
The front panel display changes in the following
sequence:
➞ Channel Number ➞ AV1 ➞ AV2 ➞ DV
If you’ve connected a digital camcorder, press the
INPUT SEL. button to select DV. (See page 53)
4 Press the REC MODE button repeatedly, (or press
the REC MODE button and then press the …
…† †
button) to select the recording speed(quality).
➞ SP ➞ LP ➞ EP ➞ XP
5 Press the REC button.
To stop recording
Press the STOP ( ) button to stop or finish
recording in progress.
• When using DVD-RAM/DVD±RW/ DVD±R discs,
the message ‘Updating the information of disc.
Please wait for a moment.’ is displayed.
Before you start
■ You can not change the record mode and
input source during recording.
■ Recording will stop automatically if there is
no free space left for recording.
■ Up to 99 titles can be recorded onto a
DVD-RAM/-RW/-R disc, and up to 49 titles
onto a DVD+RW/+R disc.
■ Recording will stop automatically if a copy
protected image is selected.
■ DVD-RAM/DVD ± RW/ DVD+R discs must
be formatted before starting to record.
Most new discs are sold unformatted.
■ Do not use DVD-R authoring discs with
this unit.
NOTE
Record Mode XP (01:11)
01050A-R145-XAA-ENG-48-58 2006.4.11 6:4 PM Page 52