Samsung DVD-R145 - Manual (Page 101)

English - 101
A
dditional
Information
Video
Sound
Checkpoint 1
Checkpoint 2
Checkpoint 3
Checkpoint 4
No sound.
Are you watching a program in scan
mode?
If you are playing a program at a
speed other than normal and fast1
speed, the sound will not be heard.
Check the connections and settings.
Check whether the disc is damaged.
Clean the disc, if necessary.
Check whether the disc is inserted
correctly with the label facing up.
Checkpoint 1
No audio output.
Check whether you have selected
the correct digital output options in
the Audio Output Options menu.
(See page 35~36.)
Check whether there is damage to or
any foreign material on your disc.
Some low quality discs may not play
properly.
If scenes change from dark to bright
suddenly, the screen may shake
vertically temporarily, but this is not a
fault.
Checkpoint 1
Checkpoint 2
Checkpoint 3
The disc revolves, but no image or bad quality
images are displayed.
Re-check the recording time and the
end time settings again.
Recording will be cancelled, if the
power is disconnected due to a
power failure or other similar reason,
while recording.
Checkpoint 1
Checkpoint 2
Timer recording does not work properly.
Timer Recording
Check if there is enough space in the
disc for recording.
Check whether the current disc is
recordable or not.
Make sure to check before the start
time of recording.
Checkpoint 1
Checkpoint 2
Timer lamp flickers.
If snow noise appears on the screen,
it means that TV does not support
HDCP (High-bandwidth Digital
Content Protection).
Checkpoint 1
Abnormal HDMI output screen.
HDMI
Check the Video output is HDMI
enabled.
Check the connection between the
TV and the HDMI jack of the DVD
Recorder.
See if your TV supports this
480p/720p/1080i DVD Recorder.
Checkpoint 1
Checkpoint 2
Checkpoint 3
No HDMI output.
01050A-R145-XAA-ENG-99-111 2006.4.11 6:9 PM Page 101