Sanyo S1 - Manual (Page 84)

9. Voice Services
Using Voice-Activated Dialing
You can use a voice dial tag to automatically dial a phone
number in your Contacts. Your phone can store up to 30 voice
dial tags.
Note: Please set the Voice Prompt feature (see page 28) to On before
using the Voice-Activated Dialing so that you can hear the voice
instruction from the phone. The default setting is
Off .
Making a Call Using Voice-Activated Dialing
To use a voice dial tag to call a phone number:
1. Press and hold or .
2. Follow the voice prompts and recite the entry’s voice dial tag
into your phone’s microphone.
Note: To use this feature, you must have stored entries for voice dialing
(see “Programming Voice Dial Tag to Your Phone” below).
Programming Voice Dial Tag to Your Phone
1. From the Contacts list display, select a Contacts entry to
which you want to add a voice dial tag and press .
2. Press (right softkey) > Set Voice Tag.
The phone will prompt you to say the name you want to
program. Wait for the beep and then say the name.
3. Respond to the prompt by repeating the name after the beep.
(The display shows “Voice Tag Recorded”.)
If you set a voice dial tag, the icon is shown next to the phone
number on the Contacts list.
Note: Record voice dial tags in a quiet environment and without the aid
of an accessory.
Options
76