Sanyo S1 - Manual (Page 36)

Selecting Vibrate Type
With this feature, you can select vibrate type for incoming calls,
messages, and schedule alarms.
1. Select > Settings > Sounds > Vibrate Type.
2. Select Incoming Calls, 10-4 ,Voicemail, Messaging, or
Calendar/Alarm.
The following items require an additional step:
Ⅲ Incoming Calls: select With Caller ID or No Caller ID.
Ⅲ 10-4: select 10-4 Calls or 10-4 Missed.
3. Select a vibrate type and press .
Selecting a Tone Length
1. Select > Settings > Sounds > Others > Tone Length.
2. Select Short or Long.
Setting a Start-up/Power-off Tone
1. Select > Settings > Sounds > Others.
2. Select Start-up Tone or Power-off Tone.
3. Select a tone, and press .
Using Voice Prompt
This feature allows you to hear voice prompts when using Voice-
Activated Dialing, Voice Memo, Screen Call setting, etc. (Default
Setting is Off.)
1. Select > Settings > Sounds > Others > Voice Prompt.
2. Select On.
Tip: When ringer volume is set to Silence All or Vibrate All , voice
prompts cannot be heard.
28