Sanyo S1 - Manual (Page 111)

2. Select Phone or Hands-free.
Ⅲ Phone to route the call through the device with which
you answer the incoming call.
Ⅲ Hands-free to route the call through the hands-free device
even if you answer the incoming call with your phone.
Tip: You can switch the call to your phone or to the hands-free device by
pressing (right softkey) > Transfer Audio anytime during the
call.
Bluetooth Settings: Device Name
Device Name allows you to select a Bluetooth name for your
phone. Your phone’s Bluetooth name will appear to other in-
range Bluetooth devices, depending on your Visibility settings.
1. From the Bluetooth Settings menu display, select Device Name.
2. Press and hold to clear the current name.
3. Use your keypad to enter a new name and press .
Bluetooth Settings: Device Information
To display your phone’s device Information:
ᮣ From the Bluetooth Settings menu display, select Device Info.
Setting Auto-Accept
You can configure your phone’s accessibility to other Bluetooth
devices.
1. Select > Tools > Bluetooth.
2. Highlight the device from the trusted devices list and press
(right softkey) > Auto-Accept.
3. Select a setting and press .
Ⅲ On to allow other Bluetooth devices to initiate a
connection without any confirmation.
Ⅲ Off to display a confirmation screen, from which you can
accept or deny the connection.
Options
Options
103