SOYO 6KB82440 - Manual (Page 41)

4 Drivers Installation Guide
Triones IDE Bus Master Drivers Installation Guide is for Intel
PIIX/PIIX3 Chipset.
MS-DOS/WINDOW/WFW
1) You should install CD-ROM in secondary channel in Windows
(WFW).
2) Change the current directory to a: or b:.
3) Under DOS command line prompt, run the SETUP directly.
After entering the setup utility, just follow the instructions of the setup.
WINDOWS NT3.5/4.0
1) From the Program Manager, double click on ÒWindows NT SetupÓ
in the Main group.
2) Select ÒOptions/Add/Remove SCSI Adapters...Ó.
3) Click on Add.
4) The ÒSelect SCSI Adapter OptionÓ dialog will appear; select ÒOther
(Requires a disk from a hardware manufacturer)Ó from the
ÒAdapter:Ó list box.
5) Next, the ÒInsert DisketteÓ dialog box will appear; insert the Triones
PIIX/PIIX3 Bus Master EIDE/ATAPI Driver disk into Drive A: and
type in Òa:\winnt35Ó and .
6) Next, the ÒSelect OEM OptionÓ dialog box will appear; select
ÒPIIX/PIIX3 Bus Master EIDE/ATAPIÓ and click ÒOKÓ.
7) Next, the ÒSelect SCSI Adapter OptionÓ dialog box will appear;
click on the ÒInstallÓ button in the dialog box. If installation is
successful, the ÒSCSI Adapter SetupÓ dialog box will reappear, and
ÒPIIX/PIIX3 Bus Master EIDE/ATAPIÓ will be listed. That means
the driver is installed.
8) Reboot your system to load the driver.