SOYO 6KB82440 - Manual (Page 37)

BIOS Setup 33
Onboard Parallel Port Choose the printer I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5
Onboard Printer Mode Choose SPP, ECP, EPP/SPP, or ECP/EPP
mode. The mode depends on your
external device that connects to this port.
ECP Mode Use DMA Choose 3 (default) or 1 to select DMA3 or
DMA1 when using the ECP device.
Parallel Port EPP Type Choose EPP specification Ver. 1.7
(default) or 1.9.
USB Controller Enable it when you are using the USB
device.