SOYO 6KB82440 - Manual (Page 26)

22 BIOS Setup
Boot Sequence Choose the boot device sequence as your need. For
example, ÒA, C, SCSIÓ means that BIOS will look
for an operating system first from drive A, drive C,
then SCSI device. Options of this function are:
A, C, SCSI;
C,A, SCSI;
C, CD-ROM, A;
CD-ROM, C, A;
D, A, SCSI;
E, A, SCSI;
F, A, SCSI;
SCSI, A, C;
SCSI, C, A;
C only;
LS120, C.
Swap Floppy
Drive Enabled changes the sequence of the A: and B:
drives. (The Default setting is Disabled.)
Boot Up Num
Lock Status Choose On or Off. On puts numeric keypad in Num
Lock mode at boot-up. Off puts this keypad in arrow
key mode at boot-up.
Gate A20
Option Choose Fast (default) o Normal. Fast allows RAM
accesses above 1MB using the fast gate A20 line.
Typematic Rate
Setting Enable this option to adjust the keystroke repeat rate.
Typematic Rate
(Chars/Sec) Choose the rate a character keeps repeating.
Typematic
Delay (Msec) Choose how long after you press a key that a
character begins repeating.
Security Option Choose Setup or System. Use this feature to prevent
unauthorized system boot-up or use of BIOS Setup.
ÒSystemÓ Ð Each time the system is booted the
password prompt appears.
ÒSetupÓÐ If a password is set, the password prompt
only appears if you attempt to enter the Setup
program.