Samsung SP-R6100 - Manual (Page 22)

42
Greeting Message
43
Ring
Greeting Message
1. In the Standby mode, press the Menu soft key.
2. Press the soft key repeatedly until Greeting Message
appears.
3. Press the Select soft key. The cursor is blinking. If you
have already registered a greeting message, the message
is displayed.
4. Enter your personal greeting by pressing the alphanumeric
keys on the number keypad. A maximum of 16 digits can be
entered. For details on entering a name, see page 33.
N o t e: If necessary, use the key to erase the current
g reeting message.
5. Press the OK soft key to save the setting.
N o t e: If you want to re s t o re the greeting message to the
default setting, S A M S U N G , erase all the existing mes-
sages and press the O K soft key.
This option allows you to enter a greeting message that will
be displayed when your phone is in the Standby mode. You
can change the greeting message according to your own pref-
erence.
Greeting Message
You can use the Ring menu to customize various sound
settings such as ring volume, type and tone. Also you can
delay the ring for a specified time via the menu.
Ring
Choosing Ring Tone
(Menu 4-1)
You can define your own ring sound. Ten ring tones are
available.The factory default setting is ‘Tone 1’.
1. In the Standby mode, press the Menu soft key.
2. Press the soft key repeatedly until Ring appears, then
press the Select soft key. Ring Tone appears.
3. Press the Select soft key to access the option.
4. Press the soft key repeatedly until you choose a
desired ring tone. Each time you press the soft key, the
handset sounds the ring you have chosen.
5. Press the OK soft key to confirm the setting.