Silvercrest KH2217 - Manual (Page 18)

- 18 -
Battery operation:
To save energy, the display illumination is deactivated in battery
operation.
1. Press the button
SNOOZE/DISPLAY DIMMER .
The display is illuminated for ca. five seconds.
Projection of the time
For the time display to be well visible on a wall or ceiling, the room must
be darkened.
ƽ
Important:
The time display projection is created with an LED.
NEVER look directly at the lightbeam. NEVER direct the lightbeam at
other people or animals.
Mains power operation:
1. Press the button
PROJECTION ON/OFF .
The projection lens glows permanently.
2. Swivel the projection lens in the desired direction.
The time is projected onto the selected position. The projection
distance ranges from ca. 0,4 m to 4,0 m
3. Adjust the sharpness of the projection with the slider FOCUS .
You can turn the projection of the time through ca. 90° with infinite
variability.
4. Turn the adjustment wheel ROTATE PROJECTION .
You can turn or mirror the projection of the time through 180°.
5. Press the button PROJECTION REVERSE .
6. To switch the projection off, press the button PROJECTION ON/OFF once
again. The projection lens extinguishes.
IB_KH2217_AR23896_LB6 24.09.2008 15:33 Uhr Seite 18