Silvercrest KH2217 - Manual (Page 15)

- 15 -
Setting the alarm time
You can programme in two different alarm times,
AL1 and AL2 .
Alarm times can only be programmed with the radio switched off.
1. Press the button
AL1 SET .
The alarm time AL1 blinks.
The button
HOUR+ SET can be pressed numerous times in succession or
held down firmly.
2. Press the button HOUR+ SET to set the hours.
3. As soon as the desired hour indication is shown in the display for
alarm time AL1 , release the button. The button MIN+ SET can be pressed
numerous times in succession or held down firmly.
4. Press the button MIN+ SET , to set the minutes.
5. As soon as the desired minute indication is shown in the display for
alarm time AL1 , release the button.
6. Press the button AL1 SET or wait a few seconds.
The programmed alarm time will be taken over.
7. To programme in the second alarm time, repeat the steps 1 to 6.
8. However, instead of pressing button
AL1 SET , press the button AL2 SET .
Switching the alarm function on
Note:
If you wish to be woken by the radio, programme in both the desired
sound volume and the radio station for the alarm call in advance
(see chapter "Adjusting the volume").
IB_KH2217_AR23896_LB6 24.09.2008 15:33 Uhr Seite 15