Samsung HT-TWZ412 - Manual (Page 26)

ENg
●
CONNECTIONS
CONNECTINg THE VIDEO OUT TO YOUr TV
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Home Theater to the HDMI
IN jack on your TV.
METHOD 2 : Component Video
If your television is equipped with Component Video inputs, connect a component video cable(not supplied) from the
Component Video Output (Pr, Pb and Y) Connectors on the back of the main unit to the Component Video Input
Connectors on your TV.
METHOD 3 : Composite Video
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO
IN jack on your TV.
Resolutions available for the HDMI output are 480p, 720p,1080i/1080p.
This product operates in Interlace scan mode (480i) for Component Output.
After making the video connection, set the Video input source on your TV to match the corresponding Video
output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the Home Theater
using the TV's remote control. (This is only available with SAMSUNG TVs that support Anynet+(HDMI-CEC).)
Please check the
logo (If your TV has an logo, then it supports Anynet+ function.)
M
`
`
`
`
`
METHOD3
(supplied) METHOD2 METHOD1
HT-WZ410(TWZ412)_XAC_0219.indd 25 2008-02-20 �� 6:07:22