Siemens Model 240 - Manual (Page 11)

Siemens 240 Cordless Phone 11 Owner’s Manual
n z x Dialing a Memory Number
1.
Press .
2. Press (light blinks).
3. Press the memory location (0 to 9) to dial the number.
n z x Dialing Multiple Memory Numbers with Chain Dialing
To dial more than one memory number (such as a bank account number or
password),
1.
Press .
2. Press .
3. Press the first memory location (0 to 9) to dial the number.
4. Repeat steps 2 and 3 as needed to enter additional numbers.
n z x Deleting or Changing a Memory Number
1.
Press (light flickers).
2. Press the memory location to delete or change (0 to 9).
3. Do not enter any numbers to delete the memory number.
4. Enter a new number to change the memory number.
5. Press to save the setting (light off).
Base Operation
n z x Locate Handset with Page
1.
Press on the base.
2. The handset beeps every second for 30 seconds.
3. Press any button on the handset to end the Page.
4. Repeat as needed to locate the handset.
NOTE: Page does not work if the handset is connected to a call or
receiving a call.