Sharp LL-T1803-H - Manual (Page 18)

18
MODE SELECT Menu
Notes:
-
Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
- To choose a menu option: SELECT button
- When adjustment complete: MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the
left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
INPUT (Input mode)
The input mode can be set. ( buttons)
VESA: VESA mode
MAC:
Power Macintosh mode
400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc. ( buttons)
640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)
Note:
-
As the resolution input for other than 400 lines is
done automatically, there is no need to set it.
SCALING (Level of scaling)
Adjusts the image to optimum sharpness when
Screen expansion is taken. ( buttons)
LANGUAGE
You can chose the language used in OSD Menu.
1. Press the button.
Language Selection Menu (LANGUAGE) will
appear.
2. Chose the desired language by SELECT button.
3. Press MENU button or the button, and
Language Selection Menu will disappear.
Adjusting the screen display (With analog connection)