Sanyo CCA-BC200 - Manual (Page 22)

21
5. Right guide line alignment (flashing green rectangle)
5-1. Each time the control switch is pressed, the
right guide line moves towards the center.
Continuously pressing the control switch
moves the guide line to its maximum right
position.
Set the right guide line to match the right-side
marker of the vehicle.
5-2. Press and hold the control switch for more
than two seconds.
The right guide line alignment is now set and
the screen changes to the 3 ft. guide line
alignment setting. The 3 ft. guide line is
indicated in red on the screen.
6. 3 ft. guide line alignment (flashing light-blue rectangle)
6-1.
Each time the control switch is pressed, the
3 ft. guide line moves farther from the
vehicle.
Continuously pressing the control switch
moves the line farther away until it exceeds
a certain range and the line returns to the
position closest to the vehicle.
Set the 3 ft. guide line to match the 3 ft.
marker.
6-2. Press and hold the control switch for more
than two seconds.
The 3 ft. guide line alignment is now set and
the screen changes to the 1.5 ft. guide line
alignment setting. The 1.5 ft. guide line is
indicated in red on the screen.