Sanyo CCA-BC200 User Manual
Page 12
11
Determination of Camera Installation Position (example)
• Temporarily adhering the camera with the tape, locate a suitable installation position by adjusting
the camera angle so that the rear of the vehicle (bumper and other areas) is visible in the monitor.
• Install the camera in a position that does not allow the illumination of a high-mount brake light to
reflect into the camera lens.
• Make sure the camera does not contact or rub against the vehicle body when the rear door opens
or closes.
• Removing and re-adhering the bracket will weaken the adhesion strength.
• Position the camera so that it is not aimed directly at the headlights of rear-oncoming vehicles.
The recommended installation area is shown below:
Installing the camera outside of this area could result in reduced camera functionality and reduced
rear-view visibility.
• Installing the camera on the rear spoiler or liftgate. (example)
• The camera can also be installed in the taillight/license plate area or on the rear window.
Note
Recommended
camera installation area
Center of vehicle
15.7
in
15.7
in
70.9
in
29.5
in
9.8
in
9.8
in
Camera
Camera
Camera
Camera
< Taillight/license plate area >
< Rear window >
Need help? Call
1-800-421-5013