SMC Networks SMCWEBT-G - Manual (Page 6)

C
OMPLIANCES
ii
Industry Canada Statement
Operation is subject to the following two conditions:
This device may not cause interference and this device must accept any
interference, including interference that may cause undesired operation of the
device
This device has been designed to operate with an antenna having a maximum
gain of 1.5 dBi.
Antenna having a higher gain is strictly prohibited per regulations of Industry
Canada. The required antenna impedance is 50 ohms.
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the EIRP is not more than required for successful
communication.
EC Declaration of Conformity
SMC contact for these products in Europe is:
SMC Networks Europe,
Edificio Conata II,
Calle Fructuos Gelabert 6-8, 2o, 4a,
08970 - Sant Joan Despi,
Barcelona, Spain.
Marking by the above symbol indicates compliance with the Essential
Requirements of the R&TTE Directive of the European Union (1999/5/EC). This
equipment meets the following conformance standards:
• EN 300 328-1 December 2001 V1.3.1
• EN 300 328-2 December 2001 V1.2.1
• EN 301 489-1 September 2001 V1.4.1
• EN 301 489-17 September 2000 V1.2.1
• EN 60950 January 2000