Wireless, 27 wireless – SMC Networks SMCWEBT-G User Manual

Page 39

Text mode
Original mode

OME

ETWORK

ETTINGS

Wireless

Operating Mode

This Wireless AP may be set to Access Point, Repeater, or
Ethernet Client (Infrastructure, Ad Hoc). (Default: Access Point)

Notes: 1. After you choose the operation mode for the

SMCWEBT-G, be sure to click the SAVE SETTINGS
button to enable the new setting.

2. The Wireless AP will automatically reboot enabling

your new settings.

These modes are described below:

•

Access Point – If the SMCWEBT-G is in Access Point mode,
you must specify a common radio channel and SSID (Service
Set ID) to be used by the Wireless AP and all of your wireless
clients. Be sure you configure all of your clients to the same
values.