Samsung BL1050 - Manual (Page 13)

12
Connecting to a Power Source
Ê There are 4 indicators for battery condition that are displayed on
the LCD monitor.
Battery
indicator
i h g f
Battery
status
The battery is
fully charged
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Low battery
capacity
(Prepare to
recharge or use
spare battery)
Battery empty.
(Recharge
or use spare
battery)
Ä When using the camera and the battery in a place that is excessively cold or
hot, the battery status on the LCD may be different from the actual battery
status.
Ê Insert the battery as shown
Inserting the memory card
Ê Insert the memory card as shown.
- Turn off the camera’s power
before inserting the memory
card.
- Have the front of the memory
card facing toward the front
of the camera (lens) and the
card pins toward the back of
the camera (LCD monitor).
- Do not insert the memory
card the wrong way round.
Doing so may damage the
memory card slot.
- If the camera does not turn on
after you have inserted battery,
please check whether the battery
(+ / -).
- When the battery chamber cover
is opened, do not force the
battery chamber cover, this may
damage it.