Seiko Group TM-L60 - Manual (Page 43)

ESC ¥ n1 n2
[Name]
[Format]
[Range]
[Description]
[Notes]
[Default]
[Reference]
ESC - n
Set relative position
<1B>H<5C>H
0 n1 255
0 n2 255
Moves the print starting position to the specified number of dots
(1/180 inch units) from the current position.
l
A positive number specifies movement to the right, and a
negative number specifies movement to the left.
l
Negative numbers are specified using the supplement of N:
-N = 65536 - N
l
Divide the number of dots by 256. The integer answer is n2 and
the remainder is nl.
l
Any specification exceeding the printable area will be ignored.
Not defined
ESC $
[Name Turn underline mode on/off
[Format] <1B>H<2D>H
[Range]
O n 2
[Description] Turns underline mode on/off.
. When n = 0, underline mode is turned off.
l
When n = 1, underline mode (1 -dot line thickness) is selected.
l
When n = 2, underline mode (2-dot line thickness) is selected.
[Notes]
l
Underlines can be printed for all characters, but not for the
space skipped by an HT.
[Default]
l
Underlines cannot be printed for 90° cw rotated characters.
ESC !
ESC a n
[Name] Align positions
[Format] <1B>H<61>H
[Range]
[Description] Aligns all the data in one line to the specified position.
37