Seiko Group TM-L60 - Manual (Page 4)

INTRODUCTION
The TM-L60 is a available as a simplificative bar code printer for the following
uses:
l
One-station printer for ECR and POS use
l
Output device for scaling or measuring
l
Ticket issuing device
l
Small scale instore-marking
The TM-L60 has the following features:
l
Either label paper or thermal paper is selectable.
l
A light, ultra-compact printer.
l
High speed printing: 12 lines/second (12 X 24 font).
l
Low noise thermal printing.
l
High reliability due to a stable mechanism.
l
Easy maintenance, such as head cleaning.
l
The command protocol is based on ESC/POW™, a widely used standard.
l
The interface cable, drawer control cable, and power cable can be routed in any
of four directions: both sides, underneath, and out the back of the case.
l
The power switch is on a panel in front of the printer body, providing easy
operation, so both side and the back are still available.
l
Barcode (UPC-A, UPC-E, JAN13(EAN), JAN8(EAN), CODE39, ITF, CODABAR)
printing is possible using a bar code command.
l
Characters can be rotated 90°.
l
Repeated operation and copy printing are possible by macro definition.
l
2 drawer controls are possible using the drawer kick-out interface.
l
Since label paper can be ejected by label eject command, it is not necessary to
feed more paper than required.
l
Easy label insertion.
l
Serial number is possible on label papers.
Please be sure to read the instructions in this manual carefully before using
your new Epson printer.