SIGMA Digital Compact Camera DP1 - Manual (Page 44)

43
USING THE BUILT-IN FLASH
The cameras have built-in flash for taking pictures at night or in low
light, which is very convenient.
USING THE BUILT-IN FLASH
1
Eject the flash by sliding the Flash Pop-Up
Lever.
2
Make sure that the Flash Mode icon is
displayed on the color LCD monitor.
• While the built-in flash is charging, and Auto Focus Lamp blink and the
shutter cannot be released.
• When you have finished using the built-in flash, please return the built-in flash to
its original position.
■ Flash photography can be used in the following range.
ISO Flash Exposure Range
Auto 0.3m – 3m
ISO100 0.3m – 1.5m
ISO200 0.3m – 2.1m
ISO400 0.3m – 3m
ISO800 0.3m – 4.3m
SETTING THE FLASH MODE
It is possible to select other flash modes such as
Exposure Compensation mode or Red-Eye Reduction
mode.
Select your desired flash mode by pressing the
button.
• It is not possible to set the flash mode if the built-in flash is
in the inserted position.