Sonance M Series - Manual (Page 11)

11
SONANCE MERLOT ® M
Speaker Adjustments
Pivoting Tweeter
All Merlot M-series speakers have a pivoting tweeter that allows you to direct
sound towards or away from the listening area, depending on how the
speakers are being used:
• If you’re using the speakers in stereo or as the front left/center/right
speakers in a home theater, pivot the tweeter directly towards the listening
area. This will help the sound from the speakers blend into a solid sound-
stage even if the speakers are widely separated.
• If you’re using the speakers as surround channel speakers in a home
theater, you can create a more diffuse, spacious surround effect by
pivoting the tweeters towards a wall or window, away from the listeners.
TT o o PP ii vv o o tt tt hh ee TT w w ee ee tt ee rr ::
Apply light pressure to the plastic ring around the outside edge of the tweeter
dome, as shown in
Figure 12. Take care not to touch or apply pressure to the
tweeter dome itself.
Tweeter Level Control
The Merlot 423 M has a tweeter level control switch (see Figure 13) that boosts
or cuts the tweeter’s level by 3dB. This allows you to adjust the speaker’s
brightness to better match your listening room or personal taste.
Once you have installed the speakers, listen to a variety of music that you are
familiar with. If the music all tends to sound too bright or dull, use the Tweeter
Level Control to compensate. If some recordings sound dull and some sound
bright the speaker is accurately reproducing differences in the recordings,
and you should leave the control in the middle (0dB) position.
Figure 12: Pivoting the Tweeter
Figure 13:
Tweeter Level Control Switch
Tweeter Level
Control Switch