Samsung DVDVR300 - Manual (Page 25)

English - 25
S
ystem Setup
No Disc Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic
Automatic
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
No Disc Auto Clock Set
Clock Data CH : Automatic
Time Zone : Automatic
Daylight Saving : Automatic Automatic
Yes
No
Time ZONE
Select the time zone of your area using the ❷ but-
tons then press the ❿ or ENTER button. Select
Automatic to set the time zone automatically.
Daylight Saving
Select the On, Off or Auto using the ❷ buttons then
press the ❿ or the ENTER button.
Select Automatic to set the daylight saving automatically.
If your clock is set to the wrong time zone or day-
light saving, you can adjust these settings without
turning off the Auto Clock Set function.
Manual Clock Set
If Auto Setup fails to set the DVD Recorder-VCR’s internal
clock by locating a local TV station, follow these steps to set
the date and time manually.
NOTE: For accurate Timer Recording, your DVD Recorder-
VCR's internal clock must be set correctly.
Open “MENU”
Press the MENU button while the DVD or VCR is
in Stop or Play mode.
1
Select “Setup”
Using the ❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
Select “Clock Set”
Use the ❷ buttons to highlight “Clock Set”
then press the ENTER button.
3
Select “Manual Clock Set”
Move the highlight to “Manual Clock Set”, then
press the ENTER button.
• The Clock Set will change as shown.
4
Note