Samsung DVDVR300 - Manual (Page 17)

C
onnections
English - 17
Method 2 : Connecting to an S-video
input jack
Connect an S-video cable(not supplied) between the S-
VIDEO OUT jack on DVD Recorder-VCR and S-VIDEO IN
jack on the TV (or AV amplifier).
• You will enjoy high quality images. S-Video separates the
picture element into black and white white (Y) and color
(C) signals to present clearer images than regular video
input mode.
INPUT
S-VIDEO S-VIDEO
OUT
RF
(TO TV)
DIGITAL AUDIO OUT
AUDIO OUT COMPONENT VIDEO OUT
OPTICAL COAXIAL
R Y
CB/PB
CR/PR
L
R
AUDIO AUDIO
LINE OUT LINE IN 1
VIDEO VIDEO
L
R
L
IN (FROM ANT.)
RF
R
L
R
L
Method 3 : Connecting to Component
video input jacks(Y,C
B /T B ,C R /P B ) in
480i mode
1. Connect Component video cables(not supplied) between
the COMPONENT VIDEO OUT jacks on DVD Recorder-
VCR and COMPONENT VIDEO IN jacks on the TV (or
AV amplifier).
2. Make sure that the disc has stopped completely before
changing the mode.
If anything is not displayed on front panel display, it is
480i Mode.
• You will enjoy high quality accurate color reproduction.
Component video separates the picture element into black
and white (Y), blue (Pb) and red (Pr) signals to present
most clear and clean images.
COMPONENT
Pb
Pr
Y
COMPONENT
VIDEO OUT
Y
C B /P B
C R /P R
OUT
RF
(TO TV)
DIGITAL AUDIO OUT
AUDIO OUT COMPONENT VIDEO OUT
OPTICAL COAXIAL
R Y
CB/PB
CR/PR
L
R
AUDIO AUDIO
LINE OUT LINE IN 1
VIDEO VIDEO
L
R
L
IN (FROM ANT.)
RF
R
L
R
L
Make sure that the color coded connections match.
The Y, Pb and Pr component output jacks of your
DVD Recorder-VCR must be connected to the
exact corresponding component input jacks on
your TV. Otherwise, red or blue images will be dis-
played on the TV screen.
Make sure that the left and right audio output
jacks of your DVD Recorder-VCR are connected to
the left and right audio input jacks of your TV,
respectively.(page 18)
Note