Sanyo ECD-T1580DV - Manual (Page 27)

RGB OPERATION
Switching to RGB mode
When you connect the RGB terminals
on the back of the DVD unit to the
corresponding RGB system, then
Press MODE button on remote control
to select RGB mode, the RGB signal
will appear on the screen.
Note: When you press MODE button to
select RGB mode and there is no
any RGB signal input, then there is
nothing to display on the screen.
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.
40
40
BASS
BASS
-2
-2
TREBLE
TREBLE
-2
-2
BALANCE
BALANCE
L-R
L-R
FADER
FADER
F-R
F-R
LOUD
LOUD
ON
ON
EQ
EQ
POP
POP
VOLUME
VOLUME
AV OPERATION
Switching to AV mode
On the back of the unit, there is a
pair of AUDIO/VIDEO INPUT jacks.
When you connect an audio/video
system through these jacks, press
MODE button on the remote control
to select AV mode.
Menu Control operation in AV
mode
Press SEL button on remote control
to enter sound menu, then you can
press CH / buttons to select the
item upward or downward. Then
press VOL+/- buttons to adjust the
selected item. The corresponding
value will show on the display.
27
Mute
Press MUTE button on remote
control to cut down sound output.
Press it again to resume the
previous volume mode.