Sanyo ECD-T1580DV - Manual (Page 19)

19
OPERATION
BASIC OPERATION
Turning the player on/of f
Press the POWER button on the front
panel or (POWER) button on the
remote control to turn the player on or
off.
Open/Close the Monitor and Angle
Adjustment
Press OPEN/CLOSE button on the
front panel or point the remote control
to the remote sensor on the front panel
and press OPEN/CLOSE button on the
remote control, the monitor will draw out
automatically.
Fig.1
When the monitor draws out to a
certain location, it will turn upward
automatically and stop at vertical
position.
Fig.2
Adjusting the viewing angle.
When the monitor stops moving, you
can press PANEL+ or PANEL- button
on the remote control to turn the
monitor upward or downward at fine
steps to get a desired viewing angle.
And you can rotate the monitor left and
right from the central viewing position
at a certain angle range manually.
Do not rotate the monitor forcibly to
avoid mechanical damage.
Fig.3
Return the monitor to the central
viewing position, then press
OPEN/CLOSE button on the front
panel or press OPEN/CLOSE button
on the remote control, the monitor will
turn downward automatically .
Fig.4
When the monitor turns downward to
a certain angle, it will draw in.
Fig.5
OPEN/CLOSE button