Star Micronics LC-90 NX-1010 - Manual (Page 35)

Importing setup data from a configuration file 29
Importing setup data from a configuration file
Use the following procedure to load setup data from a previously saved
configuration file.
❏
While in the User Setup Utility, select the Load item from the menu bar.
The currently selected configuration file is the one that is highlighted in the
list that appears on the display.
❏
Click on the up and down arrows of the scroll bar at the right side of the list
or use the keyboard’s up and down arrow keys to move the highlighting up
and down until the name of the configuration file you want to use is
selected (highlighted).
❏
After selecting the configuration file you want, press Enter .
Returning to default settings
❏
To make all settings revert to their defaults (original settings), select the
Load item from the menu bar, highlight DEFAULT in the list of files, and
press Enter .
Exit Load Save General Font Paper Adjust. Port Help
= Scroll up = Scroll down = Enter = Menu Select
DEFAULT