Star Micronics LC-90 NX-1010 - Manual (Page 24)

18 User Setup Utility
Important!
Your printer cannot read the settings if your computer and printer are
connected through an optional Serial-To-Parallel Interface Converter. In such
a case, you can still use the User Setup Utility to send settings to the printer,
but you cannot read the printer’s current settings.
Changing User Setup Utility parameter settings
Changing User Setup Utility parameter settings is quite easy, regardless of
whether you are using a mouse or the keyboard. The following are basic
operations that you can use to change parameters in the General, Font, Paper,
Adjust., and Port windows.
To select a window
❏
Highlight the name of the window you want to display by clicking on it in
the menu bar, or by using the left and right arrow keys.
To select a parameter box
❏
Select the parameter box that you want by clicking inside the box with the
mouse or by moving to the box using the keyboard’s
Tab key.
Parameters are grouped inside of boxes on the screen. When you first
display a window, the current setting of the parameter in the first (upper left)
box in the window is highlighted to indicate that it is selected. When you
select a parameter box, the parameter’s current selection is highlighted.
About parameter boxes
Note that there are two types of parameter boxes. Some have up and down
arrows on the right side, which indicates that there are more than two possible
settings for these particular parameters.
After you select such a box (by clicking inside it with the mouse or by moving
to it by pressing
Tab ), use the mouse to click on the up and down buttons to
scroll through the available settings. You can also use the up and down arrow
keys to scroll through available settings.
Sleep (•) 15 min.
( ) 30 min. *