Sony CMT-GPX6 - Manual (Page 19)

So
und A
d
just
men
t/Tim
er
19 GB
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
clock” on page 8).
Use buttons on the remote for the operation.
1
Prepare the sound source you want to
play.
• CD: Load a disc. To start from a specific
track, make a program (see “Creating
your own program” on page 11).
• TAPE: Load a tape (see “Playing a tape”
on page 15).
• TUNER: Tune in a radio station (see
“Listening to the radio” on page 13).
2
Adjust the volume.
3
Press CLOCK/TIMER SET.
4
Press ./> repeatedly until “PLAY
SET” appears, then press ENTER.
“ON” appears and the hour indication
flashes.
5
Set the time to start playing.
Press ./> repeatedly to set the hour,
then press ENTER.
The minute indication flashes.
Press ./> repeatedly to set the
minute, then press ENTER.
6
Set the time to stop playing following
the same procedure as step 5.
7
Press ./> repeatedly until the
desired sound source appears.
Each time you press the button, the display
changes cyclically as follows:
8
Press ENTER.
The start time, the stop time, and the sound
source appear in turn, then the original
display returns.
9
Press ?/1 to turn off the system.
Other operations
Notes
• If you use Play Timer and Sleep Timer at the same
time, Sleep Timer has priority.
• Do not operate the system from the time the system
turns on until the play starts (about 15 seconds before
the preset time).
• If the system is on about 15 seconds before the preset
time, Play Timer will not be activated.
• You cannot use the optional component connected to
the MD/VIDEO jacks as sound sources for Play
Timer.
• You cannot activate Play Timer and Rec Timer
simultaneously.
Waking up to music
— Play Timer
t TUNER y CD PLAY T
t TAPE PLAY T
To Do this
Check the setting 1 Press CLOCK/TIMER
SELECT.
2 Press ./> repeatedly
until “PLAY SEL” appears,
then press ENTER.
Change the setting Start over from step 1.
Cancel the timer 1 Press CLOCK/TIMER
SELECT.
2 Press ./> repeatedly
until “TIMER OFF” appears,
then press ENTER.