JVC GET0471-001A User Manual

Page 3

ENGLISH

The following marks are used to indicate...

: Built-in VCD/CD player operations.

: External CD changer operations.

: Indicator displayed for the

corresponding operation.

How to use the MODE button

If you press MODE, the unit goes into functions mode,
then the number buttons (except “1” and “4”) and

buttons work as different function

buttons.

Ex.: When number button 2 works as

MO (monaural) button.

To use these buttons for their original functions
again after pressing MODE, wait for 5 seconds
without pressing any of these buttons until the
functions mode is cleared or press MODE again.

Detaching the control panel

Attaching the control panel

CONTENTS

Control panel .................................. 4

Remote controller —

RM-RK120

............. 5

Getting started ................................ 7

Basic operations ................................................... 7

Radio operations ............................. 8

Disc operations ................................ 9

Playing a disc in the unit ..................................... 9
Playing discs in the CD changer ........................... 10

Sound adjustments .......................... 14

General settings — PSM ................... 15

iPod/D. player operations ................. 17

Other external component

operations ................................... 19

Maintenance ................................... 19

More about this unit ........................ 20

Troubleshooting .............................. 23

Specifications .................................. 25

For safety...

• Do not raise the volume level too much, as this will

block outside sounds, making driving dangerous.

• Stop the car before performing any complicated

operations.

Temperature inside the car...

If you have parked the car for a long time in hot or cold
weather, wait until the temperature in the car becomes
normal before operating the unit.

EN02-07_SV3305_007A_f.indd 3

1/15/07 11:13:54 AM