English – JVC GET0471-001A User Manual

Page 24

ENGLISH

Symptoms

Remedies/Causes

MP3/WMA playback

• Tracks do not play back in the order you

have intended them to play.

Playback order is determined when the files are recorded.

• Elapsed playing time is not correct.

This sometimes occurs during play. This is caused by how the
tracks are recorded on the disc.

• “NO FILES” appears on the display.

Insert a disc that contains MP3/WMA tracks.

• Correct characters are not displayed (e.g.

album name).

This unit can only display letters (upper case), numbers, and a
limited number of symbols.

CD changer

• “NO DISC” appears on the display.

Insert a disc into the magazine.

• “NO MAG” appears on the display.

Insert the magazine.

• “RESET 8” appears on the display.

Connect this unit and the CD changer correctly and press the
reset button of the CD changer.

• “RESET 1” – “RESET 7” appears on the

display.

Press the reset button of the CD changer.

• The CD changer does not work at all.

Reset the unit (see page 2).

iPod/D. player playback

• The iPod or D. player does not turn on or

does not work.

• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.

• Buttons do not work as intended.

The functions of the buttons have been changed. Press MODE
before performing the operation.

• The sound is distorted.

Deactivate the equalizer either on the unit or the iPod/
D. player.

• “NO IPOD” or “NO DP” appears on the

display.

• Check the connecting cable and its connection.
• Charge the battery.

• Playback stops.

The headphones are disconnected during playback. Restart
the playback operation using the control panel (see page 17).

• No sound can be heard when

connecting an iPod nano.

• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.

• No sound can be heard.
• “ERROR 01” appears on the display

when connecting a D. player.

Disconnect the adapter from the D. player. Then, connect it
again.

• “NO FILES” or “NO TRACK” appears on

the display.

No tracks are stored. Import tracks to the iPod or D. player.

• “RESET 1” – “RESET 7” appears on the

display.

Disconnect the adapter from both the unit and iPod/D. player.
Then, connect it again.

• “RESET 8” appears on the display.

Check the connection between the adapter and this unit.

• The iPod’s or D. player’s controls do not

work after disconnecting from this unit.

Reset the iPod or D. player.

EN20-25_SV3305_007A_f.indd 24

1/30/07 10:36:18 AM