JVC HR-J635EA - Manual (Page 26)

26
EN
EDITING
You can use your video recorder as the source player or the
recording deck.
MAKE CONNECTIONS
1
Connect the player’s AUDIO/VIDEO OUT connector to
the recorder’s AUDIO/VIDEO IN connector.
● Use the L connector for monaural connection.
SET RECORDING DECK’S
INPUT MODE
2
Set to AUX. With this video recorder, press NUMBER
Key "0" or TV PROG.."AU" will appear instead of a
channel number.
START SOURCE PLAYER
3
Engage its Play mode.
START RECORDING DECK
4
Engage its Record mode.
NOTES:
● NTSC tapes being played back in the NTSC [ PAL mode
(
੬
pg. 33) cannot be dubbed to another recorder.
● When you dub an NTSC tape using your recorder as the
playback deck, select NTSC 3.58 (or NTSC 4.43) with the
COLOUR SYSTEM button. (
੬
pg. 32)
● Connections made to the front panel AUDIO/VIDEO input
connectors automatically override those made to the rear
panel AUDIO/VIDEO input connectors.
Your recorder Player TV Receiver Recorder Your recorder TV Receiver
VIDEO
CHAN-
NEL
AV Cable
(provided)
IMPORTANT:
● To edit, both the player and the recorder must be of the
same colour system. Press your recorder's COLOUR
SYSTEM button to select the appropriate colour system.
● For more information on multi-system compatibility,
੬
pg. 32.
* You can also use the
front panel AUDIO/
VIDEO input
connectors.
AV Cable
(provided)
Recorder
VIDEO
CHANNEL
RF Cable (provided)
Edit To Or
From Another
Video
Recorder
1 2
4 5
3
6
8
0
7 9
TV PROG.
NUMBER "0"
RF Cable
(provided)
Another recorder Another recorder
Player