JVC HR-J635EA - Manual (Page 12)

12
EN
6
q
1 2
4 5
3
6
8
0
7 9
PLAYBACK (cont.)
Manual Tracking
Your video recorder is equipped with automatic tracking
control. During playback, you can override this and adjust the
tracking manually by pressing the TV PROG. button.
OVERRIDE AUTOMATIC
TRACKING
1
Press SP/LP/EP ( ) on the remote to engage manual
tracking.
ADJUST TRACKING
MANUALLY
2
Press TV PROG. 5 or ∞ to adjust tracking.
RETURN TO AUTOMATIC
TRACKING
3
Press SP/LP/EP ( ) on the remote to re-engage
automatic tracking.
NOTE:
When a new tape is inserted, the recorder enters the automatic
tracking mode automatically.
WIDE QUALITY Indicator
WIDE QUALITY
SP/LP/EP
TV PROG.
C.RESET
FF
C. MEMORY
REW
STOP
Wide Quality
Use this function to improve image contrast which tends to
degrade especially with wide-screen TVs.
ACTIVATE WIDE QUALITY
1
During playback, press WIDE QUALITY on the
recorder.
● The WIDE QUALITY indicator will light.
● Pressing the button again turns off the light.
● Turn on/off the light according to the type of playback
picture you want.
● The setting will remain effective even though you
turn on/off the recorder.
● This function is also effective with large-screen 4:3
aspect ratio TVs as well.
Counter Memory
Returns to the counter reading of “0:00:00” to conveniently find
a specific place on the tape automatically.
SET COUNTER MEMORY
1
Press C. RESET during playback at a point you wish to
locate later. The counter reads “0:00:00”. Then press C.
MEMORY, and “M” appears on the front display panel.
ACTIVATE COUNTER
MEMORY
2
When you wish to return to the designated point, press
STOP and then REW or FF.
● The tape rewinds or fast-forwards and stops at about
0:00:00 automatically.
● To cancel Counter Memory, press C.MEMORY again.