JVC Everio GZ-MG37E - Manual (Page 15)

EN
15
By default, the HDD is set as the recording
medium. If you want to record to an SD card,
the following three operations need to be
performed.
Insert and remove the SD card only while the
power is turned off. Otherwise, data on the card
may be corrupted.
\
To remove an SD card
Push the SD card once.
After the card comes out a little, pull it out.
Preparation:
● Set the power switch to or .
\
To change the recording medium back to
the HDD
Select [HDD] in step
4.
This will also ensure stable speeds and
operation when accessing the SD card.
For details on how to format an SD card, see
“Formatting a Recording Medium” (
੬ pg. 39).
When Using an SD Card
NOTE:
For details on compatible SD cards, see “Check
the compatibility of recording media” (
੬ pg. 3).
Insert an SD card
1
Open the SD card cover.
2
Firmly insert the card with its clipped
edge first.
Do not touch the terminal on the reverse
side of the label.
3
Close the SD card cover.
Bottom of the
Camera
Clipped Edge
Change the recording medium
1
2
Select [REC MEDIA SETTING].
3
Select [VIDEO MODE] or [IMAGE
MODE].
4
Select [SD].
5
Format an SD card when using it for
the first time
QUALITY
DIS
CAMERA SETTING
BASIC SETTING
REC MEDIA SETTING
DATE/DISPLAY
REGISTER EVENT
Select
Set
COPY/MOVE
NO. RESET
VIDEO MODE
CLEAN UP
FORMAT
IMAGE MODE
0 0
Select
Set SD
HDD
Select
Set
GE
TTIN
G
ST
AR
TED
M6E3PAL.book Page 15 Wednesday, June 14, 2006 5:12 PM