JVC HM-DT100U - Manual (Page 43)

Masterpage:Right-FullCol
EN
43
Filename [HM-100U_Eng_05Index.fm]
A
Access Main Menu screen
Press [MENU].
B
Access Guide Channel Set screen
C
Input guide channel number
In that case, it is possible to change the channel
by 10 channels by pressing and holding [D E]
in steps
C and D .
D
Input receiving channel number
E
Return to normal screen
Press [MENU].
A Press [D E] to
move the arrow
to “INITIAL SET
UP”, then press
[G] or [OK].
B Press [D E] to
move the arrow
to “GUIDE
CHANNEL”, then
press [G] or [OK].
Press [D E] to input
the VCR Plus+ guide
channel number as
shown in the TV
listing.
• If you receive your
channels with a
cable box and if
you have properly
set your Controller,
“CABLE CH”
appears in place of
“VCR CH”. If not,
refer to pages 22 -
24 and re-perform
the procedure.
THEN PRESS [OK]
CLOCK SET
GUIDE CH 6
VCR CH
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
FUNCTION SET UP INITIAL SET UP TUNER SET UP
THEN PRESS [OK]
CLOCK SET
GUIDE CH 6
VCR CH
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
FUNCTION SET UP INITIAL SET UP TUNER SET UP
(Eg.) When inputting the guide
channel number for number 6
WNJU(Ind.)
Press [FG] to move
the arrow to “VCR
CH”, then press [D
E] to input the
number of the
channel on which the
guide channel’s
broadcasts are
received.
• Repeat steps C and
D for each
instance.
(Eg.) If WNJU(Ind.) is received
on channel 47
THEN PRESS [OK]
CLOCK SET
GUIDE CH 6
VCR CH 47
GUIDE CHANNEL OTHER
SELECT WITH ARROW KEYS
SELECT
OK
EXIT
MENU
FUNCTION SET UP INITIAL SET UP TUNER SET UP
HM-DH100U_Eng.book Page 43 Thursday, August 5, 2004 1:54 PM