JVC VN-V25U VN-V26U - Manual (Page 71)

71
LED State Page
This page is for setting the method for lighting the [STATUS] indicator at the side of VN-V25U/26U.
This page can be used during access using AadminB or AoperatorB.
● Press the [OK] button to enable the new settings.
A LED State For selecting whether to light up the [STATUS] indicator of this unit when it is
running.
Enable : Lights up when unit is running.
Disable : Turns off the indicator after startup is complete.
B Identify Unit If you want the [STATUS] indicator to blink such as during visual check of the
camera currently being configured from the computer, set this item to
ABlinkB.
Note:
● The light of the indicator remains off if the LED State is set to ADisableB.
A
B
VN-V25U_26U_EN.book Page 71 Friday, January 18, 2008 2:56 PM