Setting (continued) – JVC VN-V25U VN-V26U User Manual

Page 46

Setting Using Internet Explorer

Audio Page (

VN-V26U only)

This page is for setting the audio parameters.

This page can be used during access using

AadminB or AoperatorB

● To enable the new settings, press the [OK] button.

Setting (continued)

Duplex Mode

For setting the audio transmission method.
When half duplex is selected, audio sent to computers from the camera is
muted when audio is transmitted from a computer to the camera.
When full duplex is selected, you can send audio to the camera from a
computer while listening to audio sent to computers from the camera
[Set values: Half Duplex, Full Duplex]

Note:

● When AFull DuplexB has been set, there may be cases where echos will

happen as a result of the audio sent from the computer gets picked up by
the VN-V26U’s internal mike. In that case select

AHalf DuplexB.

Mike Gain

For specifying the gain value for the built-in microphone of VN-V26U.
[Set values: 0 dB, 20 dB, 26 dB, 32 dB]

VN-V25U_26U_EN.book Page 46 Friday, January 18, 2008 2:56 PM