beautypg.com

Adjusting the sound, Load a disc, and press stop, Press sound – JVC TH-A32 User Manual

Page 25: Adjust the speaker output levels (–6 db to +6 db), Press stop to stop the test tone, Press sound again

background image

23

TV

VCR

STANDBY/ON

AUDIO

VCR

TV

CENTER

REAR-R

REAR-L

TEST

DVD

FM/AM

CONTROL

AUX

TV/VIDEO

MUTING REC/MEMORY

SEARCH

TOP

MENU

MENU

CHOICE

DOWN - TUNING - UP

SLOW

AUDIO

RETURN DIMMER

DSP

SLEEP

RM-STHA35J

DVD THEATER SYSTEM

SURROUND

SUB TITLE ANGLE

ZOOM

ON SCREEN

CLEAR SETTING FM MODE

SUBWOOFER

TV VOL

AUDIO VOL

SOUND

ENTER

PROGRESSIVE

1

2

3

4

5

6

7

8

9

0

TEST

SETTING

Sound

setting

buttons

Adjusting the Sound

You can adjust the following settings.
It is recommended that you make adjustments from your actual
listening point.
– Output level for the center speaker
– Output level for the rear speakers
– Output level for the subwoofer

1

Load a disc, and Press STOP.

The source changes to DVD and playback stops.

2

Press SOUND.

“SOUND” appears on the display and the 10 keys
are activated for sound adjustments.

3

Press TEST to check if you can hear the
sounds through all the speakers at the
equal level.

Test tone menu appears on the TV.

• The test tone comes out of the speakers in the following order:

There is a time limit in doing the following steps. If the setting is
canceled before you finish, press SOUND and start from step

4

again.

4

Adjust the speaker output
levels (–6 dB to +6 dB).

Adjust the center speaker, rear
speakers and subwoofer levels
comparing to the sound from the
front speakers.

• To adjust the center speaker level, press CENTER +/–.
• To adjust the left rear speaker level, press REAR-L +/–.
• To adjust the right rear speaker level, press REAR-R +/–.
• To adjust the subwoofer level, press SUBWOOFER +/–.

5

Press STOP to stop the test tone.

6

Press SOUND again.

“SOUND OFF” appears on the display.

Notes:

• If a disc is no loaded, you cannot adjust the settings.
• You can adjust the speaker output levels without outputting the test

tone.

• If there is a speaker from which no sounds comes out, check the

speaker’s connection (see pages 6 and 7) and setting (see pages
53 and 54).

• If you press SETTING while adjusting sound, speaker settings

alternate between 5.1ch (use all sattelite speakers and subwoofer)
and 2.1ch (use only front speakers and subwoofer.)

• You can output the test tone in any surround mode, or even when

surround mode is not activated.

• When an MP3 disc is loaded, you cannot adjust the subwoofer

output level.

L

C

R

SW

LS

RS

To cancel press Stop

SOUND

TEST

9

Left front speaker

Right front speaker

Left rear speaker

Right rear speaker

Center speaker

Subwoofer

CENTER

REAR-R

REAR-L

SUBWOOFER

1

2

3

4

5

6

7

8

SOUND

SOUND

7

EN21-23TH-A35[J].pm6

03.2.13, 3:25 PM

23