JVC XA-A50CL - Manual (Page 28)

LED setting
Format setting
After "Format setting" is heard...
1. Press so that "Format" is heard, then press .
"Please select `Start format' or `Cancel format'" is heard.
When you do not press , the format setting is canceled and playback starts.
2. Press so that "Start format" is heard, then press .
The format process starts.
After finishing the format process, the Digital Audio Player turns off.
When you do not press , the format setting is canceled and playback starts.
When you select "Format" and "Please select `Start format' or `Cancel format'" is heard:
CAUTION:
Once you starts formatting all the music files including WMA-DRM are deleted.
DO NOT remove the battery until the Digital Audio Player is turned off. Otherwise, the built-in memory may
be broken.
NOTE:
The following setting is not cleared by the format process:
Volume, Play mode setting, Sound setting, Voice guide setting, LED setting
Setting
item
(Guide
voice)
Function
Voice guide
on
Activates the voice guidance function.
Voice guide
off
Activates beep sound instead of the voice guidance.
The voice for the mode setting can be always heard though the voice guide is set to off. "Please
change the battery." and "Power off" can be also heard as the low battery warning.
Setting item
(Guide voice)
Function
LED on Turn on the operation indicator.
LED off Turns off the operation indicator.
Setting item
(Guide voice)
Function
Format Enters into the format mode.
Cancel format Cancels format.
Setting item
(Guide voice)
Function
Start format Starts format. The format process starts.
Cancel format Cancels format.