JVC DD868EU - Manual (Page 44)

44
EN
SYSTEM CONNECTIONS
AV1 IN/OUT
AV2 IN/DECODER
ANT. IN
PAUSE
RF OUT
R
L
AUDIO
OUT
JLIP SYNCHRO EDIT
DECODER VCR TV
Connection To
A Satellite
Tuner
If you don't have a decoder . . .
Connect the satellite tuner to the video recorder's AV2 IN/
DECODER connector, then connect the recorder's AV1 IN/OUT
connector to the TV's 21-pin SCART connector.
NOTES:
● Set "AV2 SELECT" to "AV2". (
੬
pg. 39)
● You can use Automatic Satellite Program Recording function
(
੬
pg. 32) with this connection.
● To view a programme via the satellite tuner, select L-2 mode
by pressing NUMBER keys and/or TV PROG so that
"L-2" appears on the display panel.
● For details, refer to the instruction manual for the satellite
tuner.
Mains outlet
TV Aerial
cable
Aerial
connector
Satellite Tuner Unit
Satellite Cable
Outdoor Unit
Aerial
Back of TV
21-pin AV input
connector (SCART)
RF OUT
ANT. IN
Back of Recorder
IMPORTANT
When you set "AV2 SELECT" to "SAT" (
੬
pg. 39), it is possible to view a satellite broadcast with the TV set to its AV mode even
if the recorder is in Timer mode, in Stop mode, recording or turned off. When the recorder is in Stop mode or recording, press
TV/VCR on the remote control to turn off the VCR indicator on the display panel.