JVC SR-VS10U - Manual (Page 42)

42
EN
Changing VCR
Plus+ ® Setting
TIMER RECORDING (cont.)
IMPORTANT
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong VCR
or CABLE CH number will be displayed on the VCR Plus+
program screen (
੬
step 5 on page 41). When this happens,
perform the following steps to set the correct the Guide
Channel number for that station.
To ensure that the VCR Plus+Timer Recording operates correctly
it is necessary to set the VCR Plus+ "Guide Channel Set " for
each station. Please read the following information carefully.
VCR Plus+ Guide Channel Matching
VCR Plus+ programming system assigns a VCR Plus+ "Guide
Channel" to broadcast and cable TV channels. These Guide
Channel numbers are also called the VCR Plus+ Channel Codes.
Most TV listings have a section, usually a chart, indicating the
"Guide Channel" numbers assigned to each station. For accurate
VCR Plus+ programming the VCR Plus+ Guide Channel number
for each station should match the channel number on which it is
received in your area.
NOTES:
● In many instances the VCR Plus+ Guide Channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your VCR or cable box.
Check your TV listing, or contact your cable supplier for
details.
● Many broadcast TV stations can be viewed on cable. Check
your TV listing, or contact your cable supplier for details.
TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS INITIAL SET
SCREEN
3
Press CH 5∞ or %fi to
move the highlight bar
(arrow) to “INITIAL SET”,
then press OK or
#.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
T W
DV VHS
MENU
CH
POWER
POWER
Turn on the TV and select the AV mode.
OK
MAIN MENU
MODE SET
VHS MODE SET
DV MODE SET
TUNER SET
=INITIAL SET
PRESS ( 5,∞), THEN (OK)
PRESS (MENU) TO END