John Deere 270D LC - Manual (Page 15)

3 ft.
7 in.
(1090 mm)
with
ace.
are
Side
(2840)
2853)
2739)
2635)
2572)
(2840)
2815)
2701)
2597)
2534)
2810)
2723)
2648)
Lift Capacities (continued) 240D LC
Boldface italic type indicates hydraulic-limited capacities; lightface type indicates stability-limited capacities, in lb. (kg). Ratings at bucket lift hook; machine equipped with
1.38-cu.-yd. (1.06 m
3 ), 42-in. (1065 mm), 2,195-lb. (996 kg) bucket; 11,904-lb. (5400 kg) counterweight; standard gauge; and situated on firm, uniform supporting surface.
Total load includes weight of cables, hook, etc. Figures do not exceed 87 percent of hydraulic capacities or 75 percent of weight needed to tip machine. All lift capacities are
based on SAE J1097.
Load Point 10 ft. (3.05 m) 15 ft. (4.57 m) 20 ft. (6.10 m) 25 ft. (7.62 m) 30 ft. (9.15 m)
Height Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side Over Front Over Side
With 9-ft. 9-in. (2.96 m) arm and 28-in. (700 mm) triple semi-grouser shoes
20 ft. (6.10 m) 8,237 (3736) 8,237 (3736)
15 ft. (4.57 m) 10,540 (4781) 10,540 (4781) 9,885 (4484) 9,018 (4091)
10 ft. (3.05 m) 17,515 (7945) 17,515 (7945) 13,047 (5918) 12,589 (5710) 11,074 (5023) 8,625 (3912) 7,205 (3268) 6,113 (2773)
5 ft. (1.52 m) 23,155 (10 503) 18,059 (8192) 15,755 (7146) 11,721 (5317) 12,482 (5662) 8,184 (3712) 9,206 (4176) 5,921 (2686)
Ground Line 25,634 (11 628) 17,213 (7808) 17,721 (8038) 11,104 (5037) 12,586 (5709) 7,826 (3550) 9,235 (4189) 5,753 (2610)
–5 ft. (–1.52 m) 12,761 (5788) 12,761 (5788) 25,654 (11 637) 17,045 (7732) 17,706 (8031) 10,817 (4907) 12,372 (5612) 7,630 (3461)
–10 ft. (–3.05 m) 19,352 (8778) 19,352 (8778) 24,124 (10 943) 17,196 (7800) 17,705 (8031) 10,816 (4906) 12,389 (5620) 7,646 (3468)
–15 ft. (–4.57 m) 27,603 (12 521) 27,603 (12 521) 20,730 (9403) 17,634 (7999) 15,487 (7025) 11,110 (5039)
Buckets
A full line of buckets is offered to meet a wide variety of applications. Digging forces are with power boost. Tooth selection includes either the John Deere Fanggs ® , Standard,
Tiger, Twin Tiger, Abrasion panel, or Flare tooth, or the ESCO (Vertalok) Standard, Tiger, Twin Tiger, or Flare tooth. Replaceable cutting edges are available through John Deere
parts. Optional side cutters add 6 inches (150 mm) to bucket widths.
Bucket Bucket Bucket Arm Dig Force Arm Dig Force Bucket
Type Bucket Width Capacity* Weight Dig Force 9 ft. 9 in. (2.96 m) 11 ft. 10 in. (3.61 m) Tip Radius No. Teeth
in. mm cu. yd. m 3 lb. kg lb. kN lb. kN lb. kN in. mm
Heavy-Duty 42 1065 1.38 1.06 2,195 996 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 5
Plate Lip 48 1220 1.60 1.22 2,359 1070 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 6
54 1370 1.82 1.39 2,507 1137 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 6
Heavy-Duty 24 610 0.92 0.70 1,765 801 35,846 159.4 26,710 118.8 23,313 103.7 62.5 1588 3
High Capacity 30 760 1.20 0.92 2,010 912 35,846 159.4 26,710 118.8 23,313 103.7 62.5 1588 4
36 915 1.48 1.13 2,133 968 35,846 159.4 26,710 118.8 23,313 103.7 62.5 1588 4
42 1065 1.75 1.34 2,279 1034 35,846 159.4 26,710 118.8 23,313 103.7 62.5 1588 5
48 1200 2.03 1.55 2,505 1136 35,846 159.4 26,710 118.8 23,313 103.7 62.5 1588 6
Severe-Duty 30 760 0.95 0.73 2,080 943 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 4
Plate Lip 36 915 1.16 0.89 2,179 988 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 4
42 1065 1.38 1.06 2,345 1064 37,676 167.0 27,640 122.9 24,020 106.8 56.5 1435 5
Ditching 60 1525 1.34 1.02 1,562 709 45,273 201.4 29,244 130.1 25,225 112.2 47.0 1194 0
*All capacities are SAE heaped ratings and with side cutters.
Bucket Selection Guide*
4.0
(3.0)
3.0
(2.3)
2.0
(1.5)
2,000 2,200 2,600 3,200 lb./cu. yd.
kg/m 3
BUCKET SIZE cu.
yd.
(m
3
)
1,600 3,400
1.0
(0.8)
1.5
(1.0)
2.5
(1.9)
3.5
(2.7)
1,200 1,400 1,800 2,400 2,800 3,000 3,600
We
t
P
eat
Topsoil Coal Caliche Shale Dr
y Sand
Dr
y Clay
Limestone We
t
Earth
We
t C
lay
, Granite
Moist Sand We
t Sand
We
t Sand,
Gravel
1300
Contact your John Deere dealer for optimum bucket and attachment selections. These recommendations are for general conditions and average use. Does not include optional
equipment such as thumbs or couplers. Larger buckets may be possible when using light materials, for flat and level operations, less compacted materials, and volume loading
applications such as mass excavation applications in ideal conditions. Smaller buckets are recommended for adverse conditions such as off-level applications, rocks, and uneven
surfaces. Bucket capacity indicated is SAE heaped. *
700 800 900 1000 1100 1200 2000 1400 1500 1600 1700 1800 1900 2100
Deere 9-ft. 9-in. (2.96 m) Arm
Deere 11-ft. 10-in. (3.61 m) Arm
Vertis QCA
1300 19th Street, Suite 200
East Moline, IL 61244
Cyan Magenta Yellow Black
DKAX240270 Page 15
DKAX240270_SPECS 10/2/06 8:18 AM Page 15