Jacuzzi J-280 - Manual (Page 43)

page 39
preview each song on the disc for about 10 seconds. Simply
press again to turn off this feature.
12. Preset 3/RPT Button: In tuner mode, any station can be
stored as preset 3 by simply pressing and holding this button
for several seconds. To recall the station preset, simply press
and release this button. In CD mode pressing this button will
play a song repeatedly. Press again to turn off this feature.
13. Preset 4/RDM Button: In tuner mode, any station can be
stored as preset 4 by simply pressing and holding this button
for several seconds. To recall the station preset, simply press
and release this button. In CD mode press this button to
randomly play song tracks. Press again to turn off this feature.
14. Preset 5/DN Button: In tuner mode, any station can be
stored as preset 5 by simply pressing and holding this button
for several seconds. To recall the station preset, simply press
and release this button. In CD mode this button will browse
the folders on CD-R and CD-RW disks.
15. Preset 6/UP Button: In tuner mode, any station can be
stored as preset 6 by simply pressing and holding this button
for several seconds. To recall the station preset, simply press
and release this button. In CD mode this button will browse
the folders on CD-R and CD-RW disks.
16. BND Button: Press BND to select one of the following
frequency bands: FM1, FM2, FM3, AM1, AM2 and WB (weather
band).
17. Tuning UP/DOWN Buttons: Press Track Up to manually
adjust station frequency up. Press and hold Track Up to scan
for next higher station. Scan mode stops as soon as a strong
station is found. Press Track Down to manually adjust frequency
down. Press and hold Track Down to scan for next lower
station. Scan mode stops as soon as a strong station is found.
In CD mode pressing these buttons will advance the CD up or
down to the next or previous track. To fast forward or rewind
through a track, simply press and hold either button as desired
during CD playback.
18. Reset Button (Not Illustrated): If keys do not function at all
and the unit appears to be "locked up", use a ballpoint pen to
press the Reset Button under the front panel (press OPEN