Jacuzzi J-280 - Manual (Page 16)

page 12
All North American Models:
240 VAC, 3-Wire Connection (60Hz)
Figure-C
Main TB1 And TB3 Terminal Block Connections
BLK
RED
RED
RED
BLK
BLK
1
2
TB1
to Circuit
Board
Power In
Green
TB3
7.0 Spa Fill Up Procedure
FOR BEST RESULTS, READ EACH STEP IN ITS ENTIRETY BEFORE
PROCEEDING WITH THAT STEP.
1. Prepare The Spa For Filling
• Clear all debris from the spa. (Although the spa shell has been
polished at the factory, you may want to treat it with a specially for-
mulated spa cleaner. Consult your authorized Jacuzzi dealer for
additional information prior to filling spa.
• Remove filter cover, then remove filter cartridge as outlined in sec-
tion 11.1 (page 25).
2. Fill Spa
• Place the end of your garden hose into the empty filter bucket.
CAUTION: Never fill with water from a water softener. If your
water is extremely “hard”, it is preferable to fill half-way with
hard water and the rest of the way with softened water. Or, you
may fill entirely with hard water if you use a special water addi-
tive available from your authorized Jacuzzi dealer.
• Fill spa until water covers all jets but does not touch the bottom of
the lowest headrest. DO NOT OVERFILL.