JBL DVD280 User Manual

Page 37

To select any Repeat mode (other
than Repeat A-B):

1. While a disc is playing, press the

Repeat Button

1 on the remote;

the Repeat Status Bar appears (see
Figure 76).

Figure 76

2. Access the Repeat modes by

selecting the current setting,
scrolling to the desired selection
as appropriate for the type of disc
you have loaded, and pressing the
Enter Button

8 (see Figure 77).

Figure 77

3. To make the menu disappear from

the screen, press the Clear Button

G or the Status Bar R on the
remote or wait a few seconds, if
the Status Bar Time Out Setting
was turned off in the Setup Menu
(see page 23).

• To stop any Repeat Play function

and continue normal play, press the
Repeat Button

1 until the Repeat

menu appears in the on-screen
display. Select the

OFF setting.

• Repeat Play may be stopped by

pressing the Stop Button

twice.

• The Repeat modes may also be

accessed using the Player Menu
(see page 32).

A-B Repeat Play

The Repeat A-B function allows you
to select any portion of a DVD and
have it repeat continually until the
unit is manually stopped.

To initiate a Repeat A-B playback
sequence, follow these steps while
a disc is playing:

1. Press the A-B Repeat Button

on the remote when you want to
choose a scene as the beginning
point;

REPEAT A appears in the

upper right corner of the Status Bar
(see Figure 78).

Figure 78

2. Press the A-B Button

K again to

choose a scene as the end point.
Repeat A-B has been set, and the
A-B section will be played continu-
ously (see Figure 79).

Figure 79

3. Press the A-B Repeat Button

on the remote again to cancel
Repeat A-B mode.

4. To make the Status Bar disappear

from the screen, press the Clear
Button

G on the remote or wait a

few seconds, if the Status Bar Time
Out Setting was turned off in the
Setup Menu (see page 23).

NOTE: The A-B Repeat range may
cover several titles or chapters as
long as the DVD´s control system
does not force the unit to return to
any DVD menu in between.

Information Menus

The DVD280 has the capability to give
you an on-screen overview about
various information on the current
disc, such as ID3 tags, or important
player settings, by pressing the Info
Button

g or using the Player Menu,

without having to stop the playback
mode.

While the disc is playing, press the
icon on the bottom of the left side of
the Player Menu screen for detailed
information on the disc playing (see
Figure 80), including the disc type,
disc name if one was provided when
it was recorded, aspect ratio settings
for the disc and player, video stan-
dard for the disc and player, scan
type (interlaced vs. progressive) for
the disc and player, audio resolution,
audio format, and the video and audio
bit rates.

Figure 80

Press the icon again to remove the
information display from the screen.

DVD280 OM 7/12/04 4:42 PM Page 37