JBL DVD280 - Manual (Page 36)

36
While playing a disc, press the Audio
Button
3 on the remote control
once to see the Audio Display with the
current audio language and format
(see Figure 73). Scroll to select other
languages and/or audio formats.
Figure 73
NOTES:
• The audio feature only works if the
disc was created with multiple
audio tracks.
• Some DVDs do not not allow direct
selection of audio during playback.
Instead, you must use the audio
setup section of the disc menu.
• When you choose an audio lan-
guage with the Audio Button 3
on the remote control, you override
the audio language setting in the
DVD280’s Audio submenu only
temporarily.
• The Audio feature may also be
accessed using the Player Menu
(see page 32).
Changing the Subtitle
Language
DVDs may contain a variety of sub-
titles. In normal play, the unit will
always look for the default setting for
the subtitle language, but you may
temporarily change that language at
any time using the Subtitle Button
U on the remote.
While playing a disc, press the
Subtitle Button
U on the remote
control once to see the Subtitle dis-
play with the current subtitle lan-
guage (see Figure 74). Scroll to select
other subtitle languages.
Figure 74
NOTE: The subtitle feature only works
if the disc was created with subtitles.
The subtitle feature may also be
accessed using the Player Menu
(see page 32).
Changing the Camera Angle
A special feature of the DVD format
is its capability of showing more than
one view, or camera angle, of the
same scene. This feature enables
you to become the director, selecting
the view of a scene that you wish.
However, this feature does not
appear on many discs and, when it
does appear, it will typically be for
only certain scenes and not for the
entire disc’s program.
To see whether a disc contains multi-
ple angles, check the disc’s cover or
jacket. When the DVD´s title or chap-
ter played currently does contain
scenes with multiple angles, the
multi-angle symbol in the upper
right corner of the front-panel display
will flash. The multi-angle feature is
only available when this symbol is
flashing.
When the multi-angle symbol flashes,
you can press the Angle Button
M
on the remote control. The Angle
Display will appear with the camera
angle currently being viewed and the
total number of angles on the disc
(see Figure 75).
Press the Angle Button M again to
change the camera angle. The num-
ber of angles available may differ
from one disc to another.
Figure 75
NOTE: When viewing JPEG images,
the Angle Button
w may be used to
rotate the image. Make sure to stop
playback of any audio files on the
disc. With the image on-screen,
press the Angle Button
w once to
display the current orientation of the
image, usually +0. Press the Angle
Button
w again within one second
to rotate the image clockwise 90
degrees. The new orientation of +90
will be displayed. Each additional
press of the Angle Button
w will
continue to rotate the image clock-
wise by 90 degrees.
Repeat Play
The DVD280 offers several repeat
functions that allow you to take
advantage of the capacity of the unit
for unattended playback:
• Repeat 1 Chapter: Repeats the DVD
chapter currently being played until
the disc is manually stopped; in the
front-panel display, REPEAT
O and
1 O will light up, and REPEAT 1
will appear in the Status Bar.
• Repeat Title: For DVD discs only,
this mode repeats the title currently
being played until the disc is manu-
ally stopped; in the front-panel dis-
play, REPEAT
O and ALL O will
light up, and REPEAT ALL will
appear in the Status Bar.
• Repeat Program: Repeats the cur-
rent playlist if Programmed Order
has been selected at the Playlist
setting.
• Repeat 1 Track: For VCDs, SVCDs,
CDs, MP3s and WMAs, repeats the
track or file currently being played
until the disc is manually stopped.
The Repeat
O and 1 O indicators
will light in the front-panel display,
and
REPEAT 1 will appear in the
Status Bar.
• Repeat Disc: For VCDs, SVCDs, CDs,
MP3s, WMAs, JPEGs and discs
containing both MP3s and JPEGs,
repeats the entire disc until play is
manually stopped. The Repeat
O
and All O indicators will light in the
front-panel display, and REPEAT
ALL will appear in the Status Bar.
• Repeat Folder: For MP3s, WMAs
and JPEGs, repeats all tracks within
the current folder until play is manu-
ally stopped. The Repeat
O indica-
tor will light in the front-panel dis-
play, and
REPEAT FOLDER will
appear in the Status Bar.
• Repeat A-B: Repeats any selected
portion of the disc until the disc is
manually stopped (see page 37 for
more information).
DVD280 OM 7/12/04 4:42 PM Page 36